Green4Care Smart 5LPM

Green4Care Oxygen concentrator adopts international advanced oil-free lubricate air compressor technology and gas separation technology , it uses PSA gas separation to separates oxygen from air, improving the concentration up to 94% and supplying oxygen continuously. It is able to relieve human bodies’ discomfort that cause by work stress or lack of oxygen.

This product has numbers of feature, such as long continues work time, simple operation, easy to use, long lifetime, low power consumption, low noise, etc. Its operation cost is very low and even 1 kilowatt hour is sufficient for up to 3 hours continuous working, so it is perfect for family healthcare using, and its compact and small-sized design is able to provide you the ideal portable healthcare equipment for outdoor travel.

The principle of oxygen concentrator: adopting micro, high efficient, low cost oil-free compressor, compressing the air to a given pressure, performing adsorption and desorption through high-quality intake sieve bed under normal temperature, and generating oxygen to patient.

Features:

• Complies with the requirements of ISO-8359 & F1464-1996
• Proven reliability and efficiency
• 93%±3% oxygen concentration at all liter flows (standard type:3, 4, 5L/min, customized type:6,8,10L/min)
• High oxygen outlet pressure above 7 psig (50kPa)
• Low sound level below 42dBA (standard type:3, 4, 5L/min)
• Low adsorption pressure (about 0.15 Mpa)
• Alarms: power failure, high and low pressure temperature, low oxygen concentration(except OC-S)
• Information display: LCD.
• Oxygen concentration indicator "Green,yellow, red bar on the LCD
• Air outlet permits nebulizer treatments (optional)
• Intelligent fault diagonis.

Specification

Operating System	Timed Cycle/Rapid Pressure Swing
Power Consumption (W)	350
Electrical Requirement (V/HZ)	220±10% 50±1 or Customize as demand
Delivery Rate(L/min)	0-5
Oxygen Concentration (%)	≥94
Outlet Pressure (MPa)	0.05-0.0
Sound Level (dBA)	standard type:3, 4, 5L/min,≤42
Operating Environment Ambient Temperature (℃)	10-40
Humidity Range (%)	≤80
Equipment Class and Type	Class â…¡ | Type B
Safety Alarms & Features	Power Failure, High Pressure / Low Pressure, Low Oxygen Concentration (optional), Temperature, Current overload or line surge shutdown, Thermal Switch, 40 psig Pressure Relief Valve
Nebulizer Particle	Median Diameter≤5μm, Percent: 90%, optional
Weight (Kg)	25
Dimensions (mm)	380X340X690

Green4Care Smart 10LPM

Green4Care Oxygen concentrator adopts international advanced oil-free lubricate air compressor technology and gas separation technology , it uses PSA gas separation to separates oxygen from air, improving the concentration up to 94% and supplying oxygen continuously. It is able to relieve human bodies’ discomfort that cause by work stress or lack of oxygen.

This product has numbers of feature, such as long continues work time, simple operation, easy to use, long lifetime, low power consumption, low noise, etc. Its operation cost is very low and even 1 kilowatt hour is sufficient for up to 3 hours continuous working, so it is perfect for family healthcare using, and its compact and small-sized design is able to provide you the ideal portable healthcare equipment for outdoor travel.

The principle of oxygen concentrator: adopting micro, high efficient, low cost oil-free compressor, compressing the air to a given pressure, performing adsorption and desorption through high-quality intake sieve bed under normal temperature, and generating oxygen to patient.

Features:

• Complies with the requirements of ISO-8359 & F1464-1996
• Proven reliability and efficiency
• 93%±3% oxygen concentration at all liter flows
• High oxygen outlet pressure above 7 psig (50kPa)
• Low sound level below 50dBA
• Low adsorption pressure (about 0.15 Mpa)
• Alarms: power failure, high and low pressure temperature, low oxygen concentration
• Information display: LCD.
• Oxygen concentration indicator "Green,yellow, red bar on the LCD
• Air outlet permits nebulizer treatments (optional)
• Intelligent fault diagonis.

Specification

Operating System	Timed Cycle/Rapid Pressure Swing
Power Consumption (W)	350
Electrical Requirement (V/HZ)	220±10% 50±1 or Customize as demand
Delivery Rate(L/min)	0-10LPM
Oxygen Concentration (%)	≥94
Outlet Pressure (MPa)	0.05-0.0
Sound Level (dBA)	standard type: ≤50
Operating Environment Ambient Temperature (℃)	10-40
Humidity Range (%)	≤80
Equipment Class and Type	Class â…¡ | Type B
Safety Alarms & Features	Power Failure, High Pressure / Low Pressure, Low Oxygen Concentration (optional), Temperature, Current overload or line surge shutdown, Thermal Switch, 40 psig Pressure Relief Valve
Nebulizer Particle	Median Diameter≤5μm, Percent: 90%, optional
Weight (Kg)	27
Dimensions (mm)	380X340X690

Green4Care Smart 10LPM

VisionAire is the lightest and quietest oxygen concentrator on today's market. At just 30 lbs. (13.6 kg), this lightweight, 5 LPM, compact oxygen machine is the most economical and power-efficient choice for in-home oxygen. With attractive, contemporary styling, a primary feature of this home concentrator is its near-silent operation. VisionAire appeals to the most sound-sensitive patients and their significant others who value their quiet time at home.

This 5 LPM, continuous flow, compact oxygen concentrator is even lightweight enough to bring along for travel. Oxygen patients enjoy the quiet, lightweight, and power-efficient features of this economical oxygen concentrator.

The VisionAire unit is easy to use, easy to clean, and virtually maintenance-free. All units can be equipped with or without oxygen monitor to verify concentration. VisionAire is available through authorized, local oxygen equipment providers.

Specifications

• Oxygen Concentration:* 1-5 LPM at 90% +5.5/-3% (Based on 70ºF [21ºC] at sea level.)
• Dimensions: 20.8 in. high x 14.1 in. wide x 11.5 in. deep (52.8 cm high x 35.8 cm wide x 29.2 cm deep)
• Weight: 30 lb (13.6 kg)
• Power: 220-240 VAC, 50 Hz; 220 VAC, 60 Hz
• Power Consumption: 290 Watts
• Alarms: Power failure, high and low pressure, temperature, low concentration (with optional oxygen monitor)
• Sound: 40 dBA
• Temperature Range: Operational temperature: 41ºF to 105ºF (5ºC to 40ºC.) (Operating unit outside of this range can affect perfce.) Storage temperature: -4°F to 140°F (-20°C to 60°C)
• *Specifications subject to change without notice.

Focus Product

At less than 2 lbs. (0.8 kg), Focus by AirSep, is the world’s smallest and lightest portable oxygen concentrator (POC) available anywhere.

This ultra lightweight POC is easy to use and never needs refilling. Simply plug it into an AC or DC power outlet, or operate it on battery for unlimited oxygen. Vacations, trips, and other special events are now possible — whether just around the corner or around the world.

The search for an oxygen portable that is not too heavy ends with Focus. One can regain confidence and independence today and feel the difference a lighter, wearable portable O2 system can make for ambulation.

Specifications

• Oxygen Concentration:* A 2 pulse setting of 90% +5.5/-3%
• Dimensions: 6.4 in. high x 4.8 in. wide x 2.5 in. deep (16.4 cm high x 12.2 cm wide x 6.1 cm deep)
• Weight: 1.75 lb (0.8 kg), (Optional) AirBelt: 1.8 lb (0.8 kg)
• Power: Universal Power Supply: 100-240 VAC (1.5 amps max at 120 VAC, 50/60 Hz); 11-16 VDC (5.0 amps max); Rechargeable, lithium battery Focus unit: 25 W
• Battery duration: 3 hours — 1.5 hours per battery (2 included)
• Battery recharge time: 4 hours (Optional) AirBelt duration: 4 hours Recharge time: 3 hours
• Battery cycle life: Approximately 300 cycles, then 80% capacity or below
• Warm-up time: 2 minutes
• Audible alarms and visual indicators: Start-up – audible and visual (GREEN and RED alternating indicator lights); GREEN stays on); Pulse flow – visual (GREEN light); cannula disconnect – audible and visual (AMBER alarm light); Breath rate alarm – audible and visual (AMBER warning and alarm lights); General malfunction – audible and visual (RED alarm light); Service required: visual (AMBER alarm light); Low battery (audible alarm and AMBER warning light) Battery condition – battery level indicator on battery (GREEN flashing indicator light)
• Temperature range: Operational temperature: 41ºF to 104ºF (5ºC to 40ºC.) (Operating unit outside of this range can affect perfce.) Storage temperature: -2ºF to 140ºF (-20ºC to 60ºC)
• Altitude: Up to 12,000 ft (3,657.6 m.) (Higher altitudes may affect perfce.)
• *Based on an atmospheric pressure of 14.7 psi (101 kPa) at 70°F (21°C)

Freestyle 5

Life to the Fullest — Higher Capacity POC

FreeStyle™ 5* is a new, full-capacity portable oxygen concentrator (POC) from AirSep — the world’s expert in oxygen generating technology. The FreeStyle 5 POC offers 5 pulse setting options, which ensure that even your more challenging ambulatory O2 patients can exercise and have access to the oxygen they need — all in a lightweight, compact, portable unit. FreeStyle 5 is an attractive, contemporary, non medical- looking device whose pulse-flow delivery enables higher- flow patients to be as active as possible. It’s the lightest POC in its class.

Easy to Use, Easy to Operate

The FreeStyle 5 concentrator is easy to use and easy to operate. This model provides patients with all the advantages of the standard FreeStyle unit, including proven reliability and durability in a slightly larger platform for greater capacity. In fact, FreeStyle 5 is the lightest higher- capacity POC on the market at 5.8 lbs (2.6 kg).

Multiple Power Options

FreeStyle 5 can be conveniently used and recharged simultaneously through a universal AC/DC power supply. This allows a patient to depend on the flexibility of what FreeStyle 5 offers, whenever and wherever the oxygen unit is used. A lightweight AirBeltâ„¢ accessory, which was designed to be conveniently worn around the waist, ensures that extended battery time between recharges is possible. This option can be marketed to patients, affording them the ability to maximize duration time on FreeStyle 5 for those occasions when AC or DC power is not readily available. The POC keypad and its AirBelt both show a digital display of total remaining battery charge in 25 percent increments, which corresponds to how much operating time remains before needing to recharge the unit.

Specifications

• Oxygen1-5 pulse settings; equivalent to a
• Concentration**: continuous flow of 1-5 LPM
• Dimensions: 10.5 in. H x 6.4 in. W x 4.4 in. D (26.7 cm H x 16.3 cm W x 11.2 cm D)
• Weight: 5.8 lb (2.6 kg)
• Power: 100-250 VAC, 50/60 Hz; 11-16 VDC; rechargeable, lithium battery
• Battery Up to 2 hours on internal battery; up to
• Duration: 7.5 hours total when used with lightweight AirBeltâ„¢
• Audible Low battery
• Alarms and Cannula disconnect
• Visual System overdraw
• Indicators: High and low pressure & High temperature

Lifestyle Oxygen Concentration

At less than 5 lb (2.3 kg), FreeStyle by AirSep is the only truly wearable portable oxygen concentrator on the market. It is tailored specifically for those patients who know no boundaries.

FreeStyle POCs capture the heart of what it means to live the good life without limitation. As the most lightweight and quietest portable oxygen concentrator available anywhere, FreeStyle offers the same weight advantage of the smallest contents-based systems, yet provides an unlimited supply of oxygen for an enjoyable travel experience with O2. It's oxygen freedom!

FreeStyle's built-in battery provides the longest duration between recharges of any portable oxygen concentrator, while its optional AirBelt provides inconspicuous additional battery run time for outdoor and all-day events. FreeStyle and AirBelt combine fashion and function ergonomically, making it the supreme travel oxygen concentrator.

FreeStyle users travel freely between power sources and no longer need to worry about running out of oxygen.

Specifications

• Oxygen Concentration: * 90% +5.5/-3%
• Dimensions: 8.6 in. high x 6.1 in. wide x 3.6 in. deep (21.8 cm high x 15.5 cm wide x 9.1 cm deep)
• Weight: 4.4 lb (2 kg), 1.8 lb (.8 kg) optional AirBelt
• Power: AC Power Supply: 100, 240 VAC (1.0 amp at 120 VAC)
• DC Power Supply: 11-16 VDC (6.0 amps max at 13.5 VDC nominal)
• FreeStyle Unit: 28 W nominal at 3 LPM
• Battery duration: 3 setting - 2 hours; 2 setting - 2.5 hours; 1 setting - 3.5 hours Optional AirBelt when combined with the internal battery: 3 setting - 5 hours; 2 setting - 6 hours; 1 setting - 10 hours
• Battery recharge time: 3.5 hours; optional AirBelt: 3 hours
• Warm-up time: 2 minutes
• Battery cycle life: Approximately 300 cycles, then 80% capacity or below
• Audible alarms and visual indicators: Start-up, audible and visual (GREEN indicator light); Pulse flow, visual (GREEN light); Battery condition, battery level (GREEN indicator lights); cannula disconnect-audible and visual (RED alarm light); System overdraw, audible and visual (RED warning and alarm lights); High and low pressure, audible and visual (RED alarm light); Service required: visual (YELLOW alarm light)
• Sound: 38 dBA at 1 setting; 41 dBA at 2 setting; 44 dBA at 3 setting
• Temperature range: Operational temperature: 41oF to 104oF (5oC to 40oC.) (Operating unit outside of this range can affect perfce.)
• Storage temperature: -2oF to 140oF (-20oC to 60oC)
• Altitude: Up to 12,000 ft (3,657.6 m.) (Higher altitudes may affect perfce.)
• *Based on an atmospheric pressure of 14.7 psi (101 kPa) at 70oF (21oC)

LifeStyles

AirSep's LifeStyle is the most economical and inexpensive portable oxygen concentrator available anywhere. At less than 10 lbs (4.5 kg), this compact and lightweight POC was designed to accommodate the traveling, working, and highly active oxygen patient.

Operating as a pulse flow device, and combining the technologies of both an oxygen concentrator and an oxygen conserver in one unit, the LifeStyle POC gives supplemental oxygen users the ability the world over to maximize their mobility in ways they never thought possible.

LifeStyle operates on multiple power sources: on AC power (household electric), DC automobile power, or from a rechargeable battery. The battery recharges while the unit is in operation on AC or DC options.

LifeStyle is available through authorized, local oxygen equipment providers and is covered by many insurance programs, including Medicare.

Specifications

• Oxygen concentration:* 90% +5.5/-3%
• Dimensions: 5.5 in. high x 7.25 in. wide x 16.31 in. deep (13.9 cm high x 18.4 cm wide x 41.4 cm deep)
• Weight: 9.75 lb (4.4 kg)
• Power: LifeStyle unit–13 VDC, 42 watts; Power supply–100–250 VAC, 50/60 Hz, 2.0 amps max; Battery pack–12 VDC, nominal
• Battery duration: 50 minutes nominal for fully-charged battery; up to 3 1/4 hours with 3 batteries in optional PowerPack
• Battery charge time: 2-2 1/2 hours; PowerPack with up to 3 batteries — 4 hours
• Warm-up time: 3 minutes
• Audible alarms and visual indicators: Start-up – audible and visual (green indicator light); Pulse flow – visual (green pulse light); Battery condition – audible and visual (yellow indicator, warning, and alarm lights); Cannula disconnect – audible and visual (red alarm light); System overdraw – audible and visual (red warning and alarm lights); High and low pressure – audible and visual (red alarm light)
• Sound: 50 dBA
• Temperature range: Operational temperature: 41°F to 104°F (5°C to 40°C.); (Operating unit outside of this range can affect perfce.) Storage temperature: -4°F to 140°F (-20°C to 60°C)
• Altitude: Up to 12,000 ft (3,657.6 m.) (Higher altitudes may affect perfce.) *Based on an atmospheric pressure of 14.7 psia (101 kPa) at 70°F (21°C)

Newlife Elite Oxygen Concentrator

NewLife Elite is AirSep Corporation’s most economical line of stationary oxygen concentrators, delivering up to 5 lpm of therapeutic oxygen in home, hospital, and clinical settings. With hundreds of thousands of units in daily use throughout the world, this low power consumption concentrator is known for high perfce, easy maintenance, and unmatched reliability. (Flow lockdown and other unique features make this a concentrator of choice among today’s patients and equipment providers.)

Units are available with an optional oxygen monitor, and an exclusive economy mode (only available with this option) provide the efficiency of a 3 lpm unit, as needed.

The units can also be equipped with a pediatric flowmeter for use with infants and other patients prescribed for low liter flow (.5–2 lpm).

NewLife Elite’s Air Outlet option enables the unit to deliver medicated nebulizer treatments simultaneously while providing supplemental oxygen.

Specifications

• Perfce:* 1–3 lpm: 95.5%–92.0%; 4 lpm: 92% ±3%; 5 lpm: 90% ±3%
• Dimensions: 27.5 in. high x 16.5 in. wide x 14.5 in. deep (69.9 cm high x 41.9 cm wide x 36.8 cm deep)
• Weight: 54 lb (24.5 kg)
• Power: 220–240 VAC, 50 Hz, 2.0 amps; 220 VAC, 60 Hz, 2.0 amps
• Power Consumption: 350 Watts
• Alarms: Power failure; high and low pressure; battery test; low oxygen concentration (with optional oxygen monitor) *Based on an atmospheric pressure of 14.7 psia (101 kPa) at 70°F (21°C).

NewLife Intensity 10 Oxygen Concentrator

NewLife Intensity 10 combines high pressure with high flow to create the premium 10 LPM oxygen concentrator. It is uniquely designed to meet oxygen patients’ high flow needs while providing the essential outlet pressure to drive special respiratory accessories, including large-volume jet nebulizers, venti-masks, and medication nebulizers. The high pressure from the concentrator also easily powers long oxygen tubing runs.

The 10 LPM NewLife Intensity 10 oxygen concentrator simplifies a tracheostomy set-up by eliminating the need for a separate external compressor. Administer humidified oxygen to a trach by connecting a jet neb bottle directly to Intensity’s O2 outlet. The NewLife Intensity 10 dual flow unit can reduce both equipment needs and overall power consumption through the delivery of oxygen to two patients simultaneously up to combined total flow of 10 LPM with one unit.

Operating at 20 psig (138 kPa), with up to 10 LPM single or dual flow capability, NewLife Intensity 10 is the only concentrator in today's marketplace that combines both maximum high flow and high pressure oxygen in one economical power-efficient unit.

All units can be equipped with or without oxygen monitor to verify concentration.

Specifications

• Oxygen Concentration:* 2–9 LPM at 92% ±3%; 10LPM at 90% ±3%
• Oxygen Outlet Pressure: 20 psig (138 kPa)
• Dimensions: 27.5 in. high x 16.5 in. wide x 14.5 in. deep (69.9 cm high x 41.9 cm wide x 36.8 cm deep)
• Weight: 58 lb (26 kg)
• Power: 220-240 VAC, 50 Hz; 220 VAC, 60 Hz
• Power Consumption: 590 Watts
• Alarms: Power failure, high and low pressure, temperature, battery test, low oxygen concentration (with optional oxygen monitor)
• Temperature Range: Operational temperature: 41ºF to 95ºF (5ºC to 35 ºC.) (Operating unit outside of this range can affect perfce.) Storage temperature: -4°F to 140°F (-20°C to 60°C) *Based on an atmospheric pressure of 14.7 psia (101 kPa) at 70°F (21°C).

Sequal Eclipse 3 With Autosat

Proven

The AARC suggests “titrate to saturate” and the Eclipse was developed with that theory in mind. With a comprehensive dosing selection, a broader patient population can be treated at rest, during sleep, at exercise and at altitude. It’s superior oxygen delivery. • autoSAT Technology, a pulse delivery system, maintains a consistent pulse dose volume for every breath as your patient’s respiratory rate changes • Consistently delivers a fixed pulse dose volume up to 96mL (in increments of 16mL) in addition, three new pulse dose volumes of 128mL, 160mL and 192mL • New control panel displays in either LPM or mL for a more accurate prescription verification • Can be used with CPAP and bi-level devices in Continuous Flow

PROVEN RELIABILITY.

Greater than 99% product reliability success rate (out-of-box and over the product life.) Fewer device failures reduce patient call backs which lower operational costs

Simple

• The Eclipse 3 is a single solution, better for your patients and your business.
• • Offers both continuous flow and pulse dosing options
• • One machine for stationary, ambulatory and travel needs
• • Lower operational costs by reducing monthly deliveries and simplifying inventory management
• • Maximum Medicare reimbursement with two billing codes: E1390 & E1392
• • Longer service intervals with lower maintenance costs
• • The only system on the market that can be upgraded in the field as new technology becomes available

Trusted

• Patients want the freedom to enjoy life at a moment’s notice and the peace of mind that the reliable Eclipse 3 delivers. It keeps up with the various activities of daily living while providing the individualized oxygen prescription.
• • Active and healthier patients create stronger referrals
• • Simplifies the patients’ continuum of care with one device
• • No waiting for cylinder deliveries and replaces bulky equipment
• • The sleek design is small, quiet and can lower electric bills
• • AC/DC and battery power options extend therapy time and patient travel
• • FAA Approved for commercial airline travel
• • Accessory options that support an active lifestyle

Sequal Integra 10LPM

Sequal Integra Product Description

Integra Ten is the High-Flow-Pro unit with over 5 years of proven reliability. No conventional concentrator can match SeQual's patented ATF valve assembly perfce. Simple keypad controls: On/Off and 02 increase/decrease arrows. Accurate, easy-read LCD flow indicator in one-half Liter increments and alerts the user if 02 hose becomes restricted. The SeQual Integra TEN home oxygen concentrator incorporates proven pressure swing adsorption principles into a unique patented ATF design and assembly, which is far more efficient and reliable than conventional oxygen concentrators.

Specifications

• Alert / Alarm: Power Interruption, Power Surge (simulated circuit breaker), Compressor Malfunction, Excessive Internal Temperature, Outlet Pressure (35-36 psig (241.2-248.1 kPa) relief valve, Abnormal Oxygen Flow Rate >+/- 30% target flow, Low Therapeutic Oxygen Output
• Electrical: 220-240V ~, 50Hz, 2.2A Nominal
• Dimensions: 14.7 in. (37 cm) x 19.5 in. (50 cm) x 26.5 in. (66 cm)
• Flow Rate: 0.5 - 10 LPM
• Indicator: Green Light = Normal Operation Yellow Light Flashing = Below Normal Operation (85%)Red Light Flashing = Abnormal
• Outlet Pressure: Nominal 6.0 PSI (41.4 kPa)Maximum 11.0 PSI (75.8 kPa)
• Oxygen Concentration: 91% (+/- 3%) on 1.0 to 10.0 LPM at sea level
• Weight: 57 lbs. (26 kg)

Nidek Nuvo Oxygen Concentrator

Nidek Medical's Nuvo Oxygen Concentrator carries forward our commitment of providing reliable, cost-effective and quality products.

An Oxygen Concentrator is a machine that generates medical oxygen. It runs on electricity and the only maintenance required is the regular cleaning of filters.

The Nuvo Oxygen Concentrator has been designed to provide a combination of enhanced features, reliability of a proven technology and unsurpassed quality.

The Nuvo Oxygen Concentrator is the largest selling concentrator in India. We promise you complete satisfaction and convenience.

Product Features

• Quiet Operation - Sound Level less than 47 dBA
• Lightweight - 22.7 Kgs - Easy to move
• Slender & Sleek design with integrated handle
• Easy access to filters & battery
• Superior grade of molecular sieve
• Patented maintenance free rotary poppet valve
• Exclusive moisture reducing wick assembly
• Reinforced base with recessed casters to guard against breakage
• Spring mounted high efficiency Thomas compressor
• Patented RPSA (Rapid Pressure Swing Absorption)
• Simple design for ease of use & maintenance

Product Specification

• Size (L x W x H) : 394mm x 396mm x 706mm
• Weight : 22.7 Kgs
• Sound Level : Less than 47 dBA
• Power Consumption : 400 Watts average
• Safety Alarms : Power Failure- Process Failure- High / Low Pressure- Low Oxygen Purity (OMS model only)
• Oxygen Purity : 0-2 LPM" 94% / 2-4 LPM – 93% / 5 LPM – 90%
• Outlet Pressure : 7 psi
• Oxygen Output : Variable" 0 to 5 LPM (1/2 Liter increment)
• Filters : Cabinet, Compressor Intake and Bacteria
• Warranty: One Year

Oxygen Cylinders

Lightweight Aluminum Cylinders

Green4Care offers aluminum oxygen cylinders in standard sizes packaged to meet your requirements.

• High-perfce
• Up to 4 times Lighter than popular steel Cylinders
• Increased gas delivery
• Cost effective and easily transportable
• Non-magnetic

Model Specifications Guide

Cylinder size Service Pressure Oxygen capacity (Aprox) Outside Diameter Overall Length Empty Weight

	psi	bar	cu ft	liters	in	mm	in	mm	ibs	kg
M9	2015	139	8.8	248.4	4.38	111.13	10.6	270.0	3.7	1.7
ME24	2015	139	24.1	682.2	4.38	111.25	25.2	639.8	7.3	3.3
M60	2216	153	60.9	1723.6	7.25	184.15	23.5	596.9	22.5	10.2

Cylinder Components

We are trader and supplier for Cylinder Componentswith good quality and medical price.
We offering these product with good quality and as per client specification.
More details to contact us.

Bipap

I Sleep 22 is an advanced high perfce and sophisticated Bi-level S device designed for OSA th.
More details to contact us.

VPAP S

Product Features

The S9 VPAP S is the next generation model for the S8 VPAP S. This Bilevel machine provides one set pressure stream for inhale, and a lower one for exhale. S9 VPAP S is an improvement over the S8 VPAP S by including 's Enhanced Easy-Breathe technology along with the Climate Control humidification system.

At its core this bilevel machine provides one set pressure for inhalation and a lower one for exhalation. This model is an improvement over the previous generation S8 VPAP S by having improved comfort features that make it easier to breath against and adjust to pressure changes, quieter for the machine user and bed partner, and manage and maintain set temperature and humidity levels as room conditions change through the night.

Enhanced Easy-Breathe Technology

This technology smooths out the transitions from inhalation to exhalation pressures making it easier to breath and adjust to the pressure changes.

Climate Control Humidification System

With the use of the ClimateLine heated tubing, the Climate Control Humidification System maintains temperature and humidity levels despite changing environment conditions throughout the night.

Quieter Motor

The S9 series of machines is an improvement over the S8 machines in the reduction of sound. The quieter motor transmits less sound down the tubing and through the mask for the CPAP user, and also is less audible to a bed partner.

Digital Display & Push Dial

The S9 VPAP S has a digital display and easy to use push dial to set and change settings and review therapy data.

SmartStart / SmartStop SmartStart

SmartStop enables your device to start automatically by breathing into the mask. This feature automatically starts and stops your CPAP machine when you put on or take off your mask.

Enhanced Vsync Technology

This technology compensates for leak by monitoring and adjusting the baseline pressure as needed.

TiControl Feature

This feature allows for more personalized settings in order to accommodate individual respiratory conditions by improving synchrony between the device and the user.

Specifications

This Product Includes...

• S9 VPAP S BiLevel Machine
• SlimLine Tubing
• Carrying Case
• Disposable Filter
• Patient Manual
• SD Memory Card
• Power Supply and Cord

Product Specifications

• S Mode Pressure: IPAP 4 to 25 cm H2O; EPAP 3 to 25 cm H2O
• CPAP Mode Pressure: 4 to 20 cm H2O
• Dimensions (L x W x H): 6.0 x 5.5 x 3.4" (153 x 140 x 86 mm)
• Sound Level: 24 dBA
• Weight: 1.84 lb (835 g)

90W Power Supply Unit

• unit Input range 100-240V, 50-60Hz
• Typical power consumption 70W (80VA)
• Maximum power consumption 110W (120VA)

• Operating Altitude: Sea level to 8500' (2591 m)
• Housing Construction: Flame retardant engineering thermoplastic
• Supplemental Oxygen: Recommended maximum supplemental oxygen flow:15 L/min
• Device Set-Up: Push Dial
• Warranty: 2 Year Manufacturer
• Aircraft use: Device meets the FAA requirements for all phases of air travel.
• SD Memory Card: 365 days summary data and 30 Days and 7 nights detailed data
• Max Exposure Heat for Machine: Machine should not be exposed to heat greater than 140 degrees Fahrenheit

VPAP Auto

Product Features

The S9 VPAP Auto is the next generation model for the S8 VPAP Auto 25. This Bilevel machine provides an automatically adjusting pressure stream for inhalation, and another for exhalation. S9 VPAP Auto is an improvement over the S8 VPAP Auto 25 by including 's Enhanced Easy-Breathe technology along with the Climate Control humidification system.

At its core this bilevel machine automatically adjusts inhalation and exhalation pressure on a breath by breath basis to keep the airway open. This model improves on the S8 VPAP Auto 25 model by providing more comfort features that make breathing and adjusting to pressure changes easier, reduce sound to the machine user and bed partner, maintain set temperature and humidity levels despite changing room conditions.

Enhanced Easy-Breathe Technology

This technology makes the transitions between inhalation and exhalation pressures smoother allowing the user to more easily adjust to pressure changes.

Climate Control Humidification System

This system uses the ClimateLine heated tubing to maintain the set temperature and humidity levels despite changing room conditions.

Quieter Motor

The improved motor design sends less sound down the tubing and through the mask for the machine user and is also less audible to the bed partner.

Digital Display & Push Dial

The S9 VPAP S has a digital display and easy to use push dial to set and change settings and review therapy data.

SmartStart / SmartStop SmartStart

SmartStart / SmartStop enables your device to start automatically by breathing into the mask. This feature automatically starts and stops your CPAP machine when you put on or take off your mask.

Enhanced Vsync Technology

Vsync monitors leak rate through out the night and compensates for leak detection by adjusting the baseline pressure as needed.

TiControl Feature

TiControl is an additional setting that can accomodate individual respiratory conditions by improving the synchrony between the user and the device.

Specifications

This Product Includes...

• S9 VPAP S BiLevel Machine
• SlimLine Tubing
• Carrying Case
• Disposable Filter
• Patient Manual
• SD Memory Card
• Power Supply and Cord

Product Specifications

• S Mode Pressure: IPAP 4 to 25 cm H2O; EPAP 3 to 25 cm H2O
• CPAP Mode Pressure: 4 to 20 cm H2O
• Dimensions (L x W x H): 6.0 x 5.5 x 3.4" (153 x 140 x 86 mm)
• Sound Level: 24 dBA
• Weight: 1.84 lb (835 g)

90W Power Supply Unit

• unit Input range 100-240V, 50-60Hz
• Typical power consumption 70W (80VA)
• Maximum power consumption 110W (120VA)

• Operating Altitude: Sea level to 8500' (2591 m)
• Housing Construction: Flame retardant engineering thermoplastic
• Supplemental Oxygen: Recommended maximum supplemental oxygen flow:15 L/min
• Device Set-Up: Push Dial
• Warranty: 2 Year Manufacturer
• Aircraft use: Device meets the FAA requirements for all phases of air travel.
• SD Memory Card: 365 days summary data and 30 Days and 7 nights detailed data
• Max Exposure Heat for Machine: Machine should not be exposed to heat greater than 140 degrees Fahrenheit

Green4Care DPAP 20

Product Features

Lightweight, compact design
Quiet, Low noise level
IExproberTM, a unique feature, automatically minimizes any pressure fluctuation due to leak, monitors and coordinates to the patients' breathing patterns.
Along with Rise Time control allows for greater patient comfort.
2.8- TFT screen, user-friendly interface design
System configuration: Pressure units, Monitoring Interface, Language setting, Date &Time setting can be customized.
Work on the bench of embeded real-OS, upgradable, extendable
Micro Sd card, 2GB, a big log on running & patient compliance
Integrated heated humidifier, click-down button for setting temperature, built-in LED indicator for temperature setting position.

Specifications:

Model Parameters	DPAP 20	DPAP25 Plus
Modes	CPAP, S	S/T,S,T,CPAP
IPAP	4-20cmH2O	4-25cmH2O
EPAP	4-20cmH2O	4-20cmH2O
CPAP	4-20cmH2O	4-20cmH2O
I-Trigger		Auto,1-3
E-trigger		Auto,1-3
Rise Time	100-600 msec	100-600 msec
Breath Rate (BPM)		Adjustable 0-40
CPAP Ramp (minutes)	0-60, 1-minute increment	0-60, 1-minute increment
Display Data	IPAP, EPAP, Vleak, BR	IPAP, EPAP, Vleak, BR, I:E Ratio, MV
Alarms	Power failure, Mask	Power failure, Mask, Apnea High/Low Rate Alarm
Noise Level (dBA)	﹤30 @ 10cmH2O	﹤30 @ 10cmH2O
Warranty	1 Year	1 Year

Green4Care DPAP 25 Plus

Product Features

* Lightweight, compact design
* Quiet, Low noise level
* IExproberTM, a unique feature, automatically minimizes any pressure fluctuation due to leak, monitors and coordinates to the patients' breathing patterns.
* Along with Rise Time control allows for greater patient comfort.
* 2.8” TFT screen, user-friendly interface design
* System configuration: Pressure units, Monitoring Interface, Language setting, Date &Time setting can be customized.
* Work on the bench of embeded real-OS, upgradable, extendable
* Micro Sd card, 2GB, a big log on running & patient compliance
* Integrated heated humidifier, click-down button for setting temperature, built-in LED indicator for temperature setting position.

Specifications:

O

Model Parameters	DPAP 20	DPAP25 Plus
Modes	CPAP, S	S/T,S,T,CPAP
IPAP	4-20cmH2O	4-25cmH2O
EPAP	4-20cmH2O	4-20cmH2O
CPAP	4-20cmH2O	4-20cmH2O
I-Trigger		Auto,1-3
E-trigger		Auto,1-3
Rise Time	100-600 msec	100-600 msec
Breath Rate (BPM)		Adjustable 0-40
CPAP Ramp (minutes)	0-60, 1-minute increment	0-60, 1-minute increment
Display Data	IPAP, EPAP, Vleak, BR	IPAP, EPAP, Vleak, BR, I:E Ratio, MV
Alarms	Power failure, Mask	Power failure, Mask, Apnea High/Low Rate Alarm
Noise Level (dBA)	﹤30 @ 10cmH2	﹤30 @ 10cmH2O
Warranty	1 Year	1 Year

S8 VPAP ST

Product Features

The S8 VPAP ST is an easy to use design that offers big perfce in a small package. The VPAP ST (Spontaneous Timing) combines non-invasive ventilation with Easy-Breathe Technology. In addition to ventilator synchronization, the VPAP ST supports 's TiControl, Vsync, and new optional Humidaire H4i Heated Humidifier.

Packed with every feature offers, the VPAP series starts out with a wider pressure range, accommodating pressures from 3cm to 25cm H20 and supports five modes of operation (Spontaneous, Timed, ST, Vauto, and CPAP). In addition to ventilator synchronization, the VPAP ST supports 's Easy-Breathe Technology, TiControl, Vsync, and new optional Humidaire H4i Heated Humidifier.

When non-invasive ventilation is required, offers three modes: Spontaneous, Spontaneous/Timed, and Timed. The VPAP ST and T modes provide a customizable backup rates to force a switch from exhalation to inhalation. Spontaneous mode simply reacts from the lack of breath with no time interval. Ventilated therapy can now take advantage of Easy Breathe technology.

Specifications:

• Maximum single fault pressure: 30 cm H2O
• S, ST and T modes: IPAP: 4 to 25 cm H2O; EPAP: 3 to 25 cm H2O
• VAuto Mode: 4 to 25cm H2O
• VAuto Pressure Support: 0 to 10cmh20
• S Mode: IPAP 4 to 25cm H2O; EPAP 3-25cm H20
• CPAP Mode: 4 to 20cm H2O
• Ramp Time: 0 to 30 min. (5-min. increments)
• Starting Ramp Pressure: 4 to EPAP; user adjustable
• Dimensions: 4.4" x 6.5" X 5.7" (112mm x 164mm x 145mm)
• Weight: 2.9 lbs
• Filters: Single Pollen
• Device Set-Up: LCD/Keypad
• Data Storage Capacity: Display: 365 days summary data and 30 nights detailed data (up to 500 events per session. Data Card: 180 days of summary data and 5 nights detailed data (up to 200 events per session)
• Electrical Requirements: 100 - 240 V, 50/60 Hz; 110 V, 400 Hz; 2.5A <140 VA (110W)(maximum power consumption). Instantaneous peak power consumption <340VA
• Humidification: Integrated Heated Humidifier or Pass-over Humidifier
• Warranty: 2 Year Manufacturer

CPAP

Content of Package

CPAP Machine, 8' Power Cord, Initial Filters, Travel Bag, 6' CPAP tubing, Instructions.

DeVilbiss introduced the entry machine on it's IntelliPAP platform. This new CPAP Machines boasts a small footprint which remains when using the optional heated humidifier.

Warranty

The DeVilbiss® product line of Sunrise Medical offers one of the most competitive guarantees on the market today. DeVilbiss® CPAP systems are warranted against defects in materials and workmanship for periods up to two years depending on the specific model. For specific details regarding this product, please refer to complete warranty information in the product service manual or patient guide.

Specifications:

• Built to meet the requirements of HCPCS code: E0601
• Shipping Dimensions (box 1): 19"wx14"hx15"d
• Ship Method(s): Ground, Next Day, 2 Day, 3 Day
• Shipping Weight: 7 lbs.
• Approvals: IEC801-2 through 5/cisprau IEC601-1 class II Type BF
• Pressure Range: 3-20 cmH2O
• Pressure Delay Function: 0 to 240 minutes
• Pressure Compensation: For mask leaks, temperatures, 7 altitude variations
• Device Set-Up: On Board set-up, PC Software, IPS, PDA
• Operating Temperature Range: 41 to 104 degrees F
• Operating Voltage: 100-240 Volts AC 50/60 Hz, 120 Vac 400 HZ
• Power Consumption: 65 Watts Maximum

CPAP

iSleep 20 is an advanced CPAP designed for easy use at home. The upright yet stable design takes a minimum space on the nightstand and suites perfectly in any bedroom.

In addition to giving extended compliance data, the iSleep 20 now also provides the care provider and/or prescribing clinician with a follow-up of the efficacy of the therapy – through AHI, based on motor-current.

The built-in continuous analysis of the therapy given will help the clinician to decide if the prescribed pressure setting is optimum for the patient with minimum of time spent.

The ‘truly’ integrated heated humidifier provides adjustable upper airway’s humidification for increased compliance.

The hose is connected in the rear of the unit and can easily be positioned using the built-in swivel. When not in use, the hose can either be easily disconnected or stored behind the unit making it look like a normal item on the nightstand. The design is adapted for use with a wide range of masks including the iMaskTM.

The Home mode prevents changes of settings that should only be changed by a clinician yet allowing the user to adapt other settings for personal preference.

Improved visibility of the unique “snooze” function, for less disturbance of the bed partner when taking off the mask during treatment.

Lightweight design and easy to take with you when travelling, including power adapter. It can even be powered from a car or recreational vehicle when enjoying an active everyday life.

• Now with AHI
• Designed for Home
• Unique ‘truly’ integrated heated humidifier
• Small footprint yet stable
• Big and easy to read display with simple menu structure and backlight
• Built-In alarm clock
• Rear hose swivel connection
• Designed for a wide range of masks
• World wide mains power compatibility
• Flexible DC power options
• Power failure restart function
• Low noise < 30dB(A)
• Adjustable ramp function
• Unique snooze function
• Comprehensive yet easy to use PC-software with remote control capability
• Clinical and Home modes

Technical Specifications

Settings/Perfces

Device modes	Clinical Home
CPAP	4 to 20 cmH2O
Integrated Humidfier	1 to 9
AHI	Apnea/Hypopnea Index
Maximum flow	> 125 litres/min at 1/3 of max pressure: 90 litres/min at 2/3 of max pressure: 130 litres/min at max pressure: 160 litres/min
Maximum limited pressure during single fault condition	30 cmH2O
Breathing resistance under single fault condition	0.8 cmH2O at 30 litres/min 2.8 cmH2O at 60 litres/min
Digital output	Yes
Sound level at 10 cmH2O	Less than 30 dB(A)
Dimensions W x H x D	173 x 172 x 201 mm (with Humidifier HA 20)
Weight	1.3 kg
Air outlet	22 mm male conical standard connector
Power Supplies
Mains supply	100 to 240 V AC
External supply	24 V DC

S9 Escape Auto CPAP

The S9 Escape is a sleek, all-in-one system that is ideal for any nightstand. has incorporated Easy-Breathe Technology along with expiratory pressure relief (EPR) to make breathing through a CPAP feel more "natural". Major improvements can be seen throughout the system with advanced features like the Optional H5i with Climate Control and ClimateLine heated tubing.

Product Features

The S9 Escape is the entry level CPAP model in 's S9 Series. Packed with technology, users can take advantage of EPR settings with Easy-Breathe and Climate Control humidification.

• Intuitive Design
• Optional Climate Control Heated Humidifier
• SlimLine or (Optional) ClimateLine Tubing
• EPR with Easy-Breathe Technology
• 24dBA Sound Level
• Auto Altitude Adjustment

Optional Humidaire H5i Heated Humidifier with Climate Control

has re-invented the Humidaire line of CPAP humidifiers. The Humidaire H5i incorporates an intelligent humidity controlling technology. The Climate Control system is managed through a combination of the S9 machine, H5i humidifier and ClimateLine heated tubing. There are five sensors throughout the system that monitor ambient temperature and patient airflow. The ClimateLine heated tubing uses a built-in mask temperature sensor to reach relative humidity at the mask. Sensors inside and outside the CPAP machine closely monitor changes in humidity and helps prevent condensation from forming inside the tube. Rainout can hinder CPAP therapy and affect compliance. With the H5i humidifier, set the level of humidity and attach the ClimateLine tubing to achieve a new level of comfort.

SlimLine and (Optional) ClimateLine Tubing

The S9 Series CPAP machines come standard with the SlimLine Tubing. The small diameter air tube is ultra-light, flexible and provides a unique alternative to bulky, generic 6 foot hoses. also offers a Standard Hose.

The ClimateLine Tubing has an internal heated coil and mask temperature sensor that helps manage rainout throughout the hose. Climate Control algorithms measure temperatures from the humidifier to prevent condensation from forming. The ClimateLine Tubing can use the SlimLine Tubing Wrap to achieve total control of rainout.

Product Specifications:

• Pressure 4 to 20 cm H2O
• Ramp Time 0 to 45 min. (5-min. increments)
• Starting Ramp Pressure 4 to min pressure
• Dimensions 6"x5.5"x3.25"
• Weight 1.79lbs
• Filters Pollen or Hypoallergenic
• Sound level 24 dBA
• Operating Altitude Sea level to 8500' (2591 m)
• SlimLine air tubing Flexible plastic, 1.83m, 15mm inner diameter
• Housing construction Flame retardant thermoplastic
• Device Set-Up Push Dial
• Humidification Optional Integrated Heated Humidifier or Pass-over Humidifier
• DC Power Only use DC Converter by for DC input or damage may occur
• Warranty 2 Year Manufacturer

S9 AutoSet CPAP

Product Features

The S9 AutoSet is the premium Automatic Positive Airway Pressure (APAP) model in 's S9 Series. had incorporated Easy-Breathe Technology along with an Enhanced AutoSet algorithm to make breathing through a CPAP feel more "natural". Major improvements can be seen throughout the system with advanced features like the Optional H5i with Climate Control, ClimateLine heated tubing, and on-display advanced data reporting.

The AutoSet series of Automatic Positive Airway Pressure (APAP) machines have long been designed to maximize comfort while providing minimal therapy pressures at the optimal moment. builds upon the AutoSet Advantage algorithm and incorporates EPR with Easy-Breathe technology in a new post modern shell. The S9 Series aesthetics are a complete redesign with new features:

Optional Humidaire H5i Heated Humidifier with Climate Control

has re-invented the Humidaire line of CPAP humidifiers. The Humidaire H5i incorporates an intelligent humidity controlling technology. The Climate Control system is managed through a combination of S9 machines, H5i humidifier and ClimateLine heated tubing. There are five sensors throughout the system that monitor ambient temperature and patient airflow.

Enhanced AutoSet Advantage

's AutoSet Advantage is the answer to providing 'just what you need, when you need it'. Pressure needs vary throughout the night. These variations depend on how deep the user is sleeping, body position, and other daily factors that can affect therapy levels. AutoSet Advantage effectively minimizes therapy and helps lower pressure-related side effects, like mouth-breathing and nasal dryness.

The Enhanced AutoSet Advantage now detects and responds to open events using an event responsive Forced Oscillation Technique (FOT). A different event response is generated when an open airway event is encountered.

AutoSet with Easy-Breathe Technology

The S9 AutoSet uses Easy-Breathe Technology along with expiratory pressure relief (EPR) to make breathing through an APAP feel natural. At the onset of a flow limitation, the AutoSet algorithm responds with an increase of therapy pressure based on the degree of airflow restriction. Easy-Breathe technology aids in smoothing the pressure waveform during pressure increase. The process imitates normal respiration and ultimately makes breathing more comfortable than traditional CPAP machines. Easy-Breathe allows the user to receive the lowest pressure necessary to keep the airway open.

Product Specifications:

• Pressure 4 to 20 cm H2O
• Ramp Time 0 to 45 min. (5-min. increments)
• Starting Ramp Pressure 4 to min pressure
• Dimensions 6"x5.5"x3.25"
• Weight 1.79lbs
• Filters Pollen or Hypoallergenic
• Sound level 24 dBA
• Operating Altitude Sea level to 8500' (2591 m)
• SlimLine air tubing Flexible plastic, 1.83m, 15mm inner diameter
• Housing construction Flame retardant thermoplastic
• Device Set-Up Push Dial
• Humidification Optional Integrated Heated Humidifier or Pass-over Humidifier
• Warranty 2 Year Manufacturer

Fisher & Paykel ICON Auto CPAP

Product Features

Fisher and Paykel has taken several features from their SleepStyle line of CPAP machines and combined those and more to enhance patient comfort and provide a personalized treatment system. An improvement over the SleepStyle 200 Auto Series, the ICON Auto incorporates both SensAwake and ThermoSmart technology in a streamlined body. The built-in heated humidifier and optional heated hose delivers condensation-free humidification at the touch of a button. The ICON Auto is ideal for home or travel and comes with an alarm clock and music playing ability.

Auto Algorithm

The ICON Auto is designed to deliver on-demand pressure. As sleeping habits can vary daily, the ICON Auto uses a flow-based auto-adjusting algorithm to continually check for flow limitations, apneas, and hypopneas on a breath-by-breath basis. When an event occurs, the Auto algorithm begins to increase pressure until the obstruction clears or the maximum pressure setting is reached. Fisher and Paykel has a benchmark comparison of the ICON Auto and other auto-adjusting CPAP machines on the market.

SensAwake Technology

SensAwake is a pressure relief technology that addresses user intolerance for Continuous Positive Airway Pressure therapy. Comfort is critical during an awakened state, particularly for new users who have difficulty returning back to sleep when CPAP pressures are high. SensAwake monitors CPAP airflow and reduces pressure levels when respiration becomes irregular. Irregular breathing is a general marker that a user is transitioning from a sleep state to an awakened state. This personalized treatment prevents users from awakening and ultimately improves therapy effectiveness.

Humidification

Under normal circumstances the air you breathe is naturally heated as it travels through your nasal passages. CPAP therapy works against this natural humidification. CPAP airflow drys the nasal passages and can lead to congestion and mouth breathing. Typical heated CPAP humidification helps re-saturate therapy air, but effectiveness is restricted by ambient temperatures. As the room cools, most humidifiers cannot keep relative humidity levels at the mask, usually resulting in condensation forming in the CPAP hose. ThermoSmart Technology delivers custom levels of high humidity that are maintained throughout the night, regardless of ambient temperature. The ICON uses sensors that track ambient room temperature to reduce condensation.

To maximize the ICON's capabilities, Fisher and Paykel offer an optional heated breathing tube that works in conjunction with ThermoSmart Technology. This heated CPAP hose contains copper coils embedded in tubing. These coils conduct heat and can provide a constant temperature throughout the hose. The optional ThermoSmart breathing tube virtually eliminates rain-out and condensation in a CPAP hose.

As an added benefit, ThermoSmart can also help lower overall therapy pressures. As higher levels of humidity start to relieve swelling within your nasal passages, resistance to therapy pressures can decrease and lower levels of therapy may become effective.

Product Specifications:

• Dimensions: 6.3 x 6.7 x 8.7 in (160 x 170 x 220 mm)
• Weight: 4.8 lb (2.2 kg) Packed Weight: 8.7 lb (4.0 kg)
• Perfce Pressure Range: 4 to 20 cmH2O
• Noise Level: < 29 dBA
• Water Chamber Volume: 420 mL
• Ambient Temperature: 41 to 95 °F (5 to 35 °C)
• Humidity: 5 to 95% Relative Humidity
• Altitude: 0 to 9,000 ft (0 to 3,000 m)

Fisher & Paykel SleepStyle Auto CPAP

Product Features

The SleepStyle 200 Auto Series is designed to provide pressure on-demand utilizing a flow-based auto-adjusting algorithm that continually checks for flow limitations, apneas, and hypopneas. Fisher and Paykel has created a fully integrated system that includes several comfort features such as Altitude compensation up to 9,000ft, leak compensation, and a new SensAwake Technology.

SensAwake addresses user intolerance for Continuous Positive Airway Pressure therapy. Comfort is critical during an awakened state, particularly for new users who have difficulty returning back to sleep when CPAP pressures are high. SensAwake monitors CPAP airflow and reduces pressure levels when respiration becomes irregular. Irregular breathing is a general marker that a user is transitioning from a sleep state to an awakened state. This personalized treatment prevents users from awakening and ultimately improves therapy effectiveness.

Unlike other machines, the SleepStyle 200 Auto is an all-in-one, fully integrated solution that ensures the machine travels easily and is compact. The built in humidifier comes with Ambient Tracking Plus, which provides effective humidity under changing conditions. Sensors measure both the inside and outside temperatures of the airflow, then adjusts the humidity levels to prevent condensation buildup and nasal discomfort during mask leaks.

Lastly, track your therapy effectiveness with PerfceMaximizer and the SmartStick. The software offers detailed reporting including data regarding compliance, AHI, leak and pressure readings.

Specifications

• Pressure Range 4-20 cm H20
• Flow Output 86 LPM @ 20cmH2o
• Ramp Time 20 mins
• Dimensions 10.8"H x 6.7"W x 5.5" D
• Weight 4.2 lbs
• Altitude Compensation Maximum height 9000 feet.
• Electrical Requirements 100 - 240 AC, 12volt DC
• Power Consumption 85W max with humidifier at max setting
• Noise Level less than 30 dBA

Humidifier Specifications

• Maximum Temperature 149°F (65°C)
• Dimensions: Built-In
• Water Capacity 400ml at recommended water level
• Heater Settings 0 to 4 adjustable by 0.5 increments
• Humidity Range: Up to 43.9 mg H2O/l

Nebulizer (NE-C25)

Product Features

Nebulizer NE-C25 compressor nebulizer system offers an affordable and efficient alternative for patients experiencing Asthma, COPD or other respiratory conditions. Its uniqueBreath-enhanced nebulizer design delivers powerful perfce and shortened treatment time. Along with this its compact and lightweight design make the delivery of medication even when you are travelling.

Nebulizer/ Compressor (NE-C28)

Product Specification

The NE-C28 Nebulizer is India’s Best Selling and Best Performing Nebulizer. Packed with powerful features, the NE-C28 Nebulizer is easy to use and delivers quiet,Powerful Compressor Perfce which is ideal for Respiratory patients of Asthma and Bronchitis. NE-C28 features include built in nebulizer holder and a carrying case along with 1 year Manufacture Warranty.

Green4Care Nebulizer

Product Specification

The unique combination of the new Green4Care Nebulizer compressor nebuliser with the Virtual Valve Technology (V.V.T.) Nebuliser kit means that more of the aerosol is a respirable size and available to the patient to inhale.The V.V.T.’s unique design results in less parts that could be lost, less parts to clean, higher hygiene and easy maintenance. When not in use, the V.V.T. nebulizer kit can be fixed on the main compressor Unit.

Green4CareTMNeb V.V.T. Nebulizer Kit: The valves in conventional nebulizers allow exhalation through mouthpiece. User can synchronize breathing with nebulization, hence reducing medication wastage. However, silicon valves are used in these nebulizers.

Specification

Voltage / Frequency	220V/50Hz
Current	0.8A
Power	75W
Flow	6.7L/min
Nebulization Pressure	75Kpa
Noise	60dB(a)
Dimension	250mm×120mm×170mm
Weight	1.56Kg

Pulse Oximeter (PO 01)

Product Specification

's Pulse Oximeter, a great device to monitor normal functioningof lungs and heart at home. Must for kids, elderly and people with Asthma, COPD,ARDS and other Heart and lung diseases. Also useful for sports and travelers. Agood device for both home as well as clinical use.

Pulse Oximeter

World Class Products From Green4Care Medical Devices

Green4Care PulseOxi TM.Fingertip Pulse Oximeter

• Small & lightweight design ( total 28g without batteries )
• Dual color OLED display
• Display SpO ,PR,Pulse bar and Plethysmogram 2
• 6 display modes
• Low power consumption, automatically power off
• Battery-low indicator
• 2 AAA alkaline or rechargeable batteries
• Adjustable brightness
• Accommodates widest range of finger sizes from pediatric to adult

BP Monitor Wrist Type (HEM-6111)

Product Specification

If you are a patient of high blood pressure, the HEM-6111 (Wrist Type) is something you can count on. The best-selling blood pressure monitor in India, it makes blood pressure monitoring at home a lot more easily. It comes packed with powerful features like a blood pressure level indicator, large and clear detection of irregular heartbeat that helps to eliminate any doubts in interpreting blood pressure readings taken from home monitors. It comes with a one-year manufacturer warranty.

BP Monitor (BP05)

Product Specification

• Accurate, Fast, Easy-to-Use
• Intelligent Pressurization
• Fuzzy Logic
• Memory – 21 Sets
• Fully Automatic Inflation and Deflation
• Blood Pressure and Pulse Measurements

BP Monitor Upper Arm (HEM-7111)

Product Specification

Model: HEM-7111 Automatic Blood Pressure Monitor
Hypertensive patients can now monitor their Blood pressure level with the HEM-7111. Unique features like Auto inflate and Simple-One touch helps in displaying the BP values and pulse rates with ease. With a memory of 14 sets, it is perfectly suitable to keep a regular check on blood pressure. It provides an easy upper arm blood pressure measurement that displays Systolic, Diastolic and Pulse rate. The HEM-7111 comes with a year?s warranty.

Digital Thermometer (MC-246)

Product Specification

digital thermometer offers a safe, accurate and quick temperature reading. It eliminates any worries about broken glass or mercury hazards.

• Actual measurement, display in 0.1 degree increment
• Professional accuracy
• Memory
• With Buzzer
• Water-resistant
• Digital, no fear of mercury poisoning

For oral, rectal and underarm temperature measurement

• Fast actual measurement - 80 sec. for oral, 60 sec. for rectal and 120 sec. for underarm measurement
• Accurate measurement- measures actual temperature in °C and °F
• Water-resistant for easy cleaning
• Memory- Recalls last reading
• Battery can be replaced
• Buzzer- Beeps when measurement is completed

Specifications:

• Power supply 1.5V DC, 1 LR41 Alkaline-Magnesium button battery
• Power consumption 0.1mW
• Battery life Approx. 2 years or more (3 times /day)
• Sensing unit Thermistor
• Measurement method Actual measurement
• Temperature display 3-digit, +°C (°F) display in 0.1 degree increment
• Measurement Accuracy ±0.1°C (32.0 to 42.0 °C); ±0.2°F (89.6 to 107.6 °F) when measured at a standard room temperature of 23 °C (73.4 °F) in a test tank held at constant temperature
• Measurement Range 32.0 °C to 42.0 °C (89.6 to 107.6 °F)
• Weight 12g (with battery)
• External Dimensions 19.4mm(w) x 132.5mm (l) x 10.0mm (d)
• Beeper Function 1 beep when power on 3 beeps after measurement completed
• Memory Function Recalls previous reading
• Auto off function Approx. 30 minutes after use or 3 minutes when not been used
• Low Battery indication Battery symbol displayed
• Accessories Protective case, test battery, 5 probe covers, instruction sheet

Body composition monitor (HBF-306)

Product Specification

MI105 is Micro controller based Body Composition Analyzer, It can Detect Various perimeters of Human Body and can perform following functions: Target Calculation.
Measures body fat percentage,
Calculates Body Mass Index (BMI)
Calculate calorie/day (BRM)
Lean weight Calculatation
calculateTotal Body Water .

Paykel RT040

Product Specification

We offering FlexiFit 432 incorporates a cleverly designed Soft Foam Cushion that combines with a contoured Silicone Seal to provide a better seal and more comfortable fit than ever before. Softer, Smaller, Smarter... The new FlexiFit 432 is Fisher & Paykel's second generation Full Face Mask for CPAP and BiPAP Therapy. It takes comfort to the next level in a very real way. More details to contact us.

Hospital Mask

Single-patient, short-term hospital use

Designed for noninvasive ventilation therapy in the hospital environment
Suitable for critical care—effective at high therapy pressures (up to 40 cm H2O)

Quick and easy to fit and release

Straight-from-the-box solution; one-piece mask, pre- assembled headgear
Quick-release headgear clips—enable quick and easy mask fitting and removal

Reliable quality and perfce

premium dual-wall technology—in a disposable mask
• High quality—tested to ’s rigorous standards

Features and Benefits

• Easy-access pressure and oxygen port - Convenient monitoring of mask pressure and delivery of oxygen
• Silicon dual-wall cushion - Stable and comfortable seal, using ’s premium cushion technology
• 360° rotating elbow - Enables the caregiver or clinician to select the most appropriate tube position
• Clearly marked frame size - Easy to see and select the mask size
• Transparent frame - Clear view enables the caregiver or clinician to monitor the patient and detect any changes during therapy
• Quick-release headgear clips - Easy detachment in an emergency and easy fitting by the caregiver or clinician, even when the patient is in bed

Paykel FlexiFit 407

Product Specification

The FlexiFit 407 Premium Nasal Mask offers an over-the-nose mask solution that fits better, feels lighter and is easier to use. The Stretchgear Headgear provides even greater comfort and a maintenance-free bias diffuser ensures quieter operation. The FlexiFit 407 Nasal Mask comes as an Out-of-Box Solution fully assembled and ready for use.

Oxygen Concentrator

Product Specification

Green4Care MEDICAL DEVICES has taken a revolutionary and innovative step & has started renting out expensive medical equipment for home use at affordable rentals. Our mission is to bring expensive care giving & life saving equipment in common man’s reach thus improving the quality of life of the “sick, disabled, old & infirm” & saving the lives of the patients who are facing life threatening situations. Our endeavor is to bring more smiles & satisfaction to patients as well as their caregivers & family members.

We Provide below products on Rental:

Oxygen Concentrator, CPAP, BIPAP, ICU & Home Ventilator, Empty Portable Aluminium Cylinder, Pulse Oximeter, Suction Machine, Nebulizer, Air Mattress, Patient Care Hospital Beds, Wheel Chair etc.

BIPAP Machines on Rent

Product Specification

Green4Care MEDICAL DEVICES has taken a revolutionary and innovative step & has started renting out expensive medical equipment for home use at affordable rentals. Our mission is to bring expensive care giving & life saving equipment in common man’s reach thus improving the quality of life of the “sick, disabled, old & infirm” & saving the lives of the patients who are facing life threatening situations. Our endeavor is to bring more smiles & satisfaction to patients as well as their caregivers & family members.

We Provide below products on Rental:

Oxygen Concentrator, CPAP, BIPAP, ICU & Home Ventilator, Empty Portable Aluminium Cylinder, Pulse Oximeter, Suction Machine, Nebulizer, Air Mattress, Patient Care Hospital Beds, Wheel Chair etc.